#ad
#ad
Esooho LYSB01IUVHB8E-ELECTRNCS #ad - Volts:dc 12v current:80mA Relative humidity.

More information about Esooho LYSB01IUVHB8E-ELECTRNCS #ad

JBtek 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM

#ad
#ad
JBtek FBA_pcb board #ad - JBtek 8 Channel DC 5V Relay Module for Arduino Raspberry Pi DSP AVR PIC ARM #ad - 5v 8-channel relay interface board, and each one needs 15-20mA Driver Current. Standard interface that can be controlled directly by microcontroller Arduino, AVR, ARM, DSP, 8051, ARM, MSP430, PIC, TTL logic. Indication LED's for Relay output status. Use it to control various appliances, and other equipments with large current.

It can be controlled directly by microcontrollerarduino, arm, PIC, Raspberry Pi, ARM, DSP, AVR, MSP430, 8051, TTL logic. Jbtek dc 5v 8 channel Relay interface board. Equiped with high-current relay, AC250V 10A ; DC30V 10A.

More information about JBtek FBA_pcb board #ad


Similar products



White 30 LED - Adafruit DotStar Digital LED Strip - Per Meter ADA2238

#ad
#ad
Adafruit #ad - You can set the color/brightness of each LED to 24-bit color 8 bits each red green and blue. This makes them excellent for use with any microcontroller or microprocessor, Propeller, Raspberry Pi, SparkCore, BeagleBone, including Arduino, and any 'raw' microcontrollers/microprocessors. Hardware spI support is handy but not required.

That means you need two pins, not one, to control DotStars. Because the clock and data is seperated, you can use any processor speed or type to control these strips, and you don't have to worry about being careful with the timing. The pwm is built into each led-chip so once you set the color you can stop talking to the strip and it will continue to PWM all the LEDs for youHowever, unlike NeoPixels, these LEDs have 2 wires input and output for sending data - one clock pin and one data pin.

White 30 LED - Adafruit DotStar Digital LED Strip - Per Meter ADA2238 #ad - Each led acts like a shift register, reading incoming color data on the input pins, and then shifting the previous color data out on the output pin. In stock & Ready to Ship. Dotstar leds use generic 2-wire spi, so you can push data much faster than with the NeoPixel 800 KHz protocol and there's no specific timing required.

By sending a long string of data, you can control an infinite number of LEDs, just tack on more or cut off unwanted LEDs at the end. Equiped with high-current relay, AC250V 10A ; DC30V 10A. Standard interface that can be controlled directly by microcontroller Arduino, AVR, ARM, MSP430, 8051, DSP, PIC, ARM, TTL logic.

More information about Adafruit #ad


Similar products



Food Grade Silicone Rubber Tubing Auto Syphon Tube Pipe Hose ID 3mm OD 4mm 3 Meters

#ad
#ad
Laimeisi #ad - Equiped with high-current relay, AC250V 10A ; DC30V 10A. Pure silicone rubber, anti-oil and waterproof, Environmentally friendly non-toxic, softness, Harmless for health, durable. Low shrinkage, temperature resistance from -40~200 Celsius degree. Material: food grade silicone, color:clear inner dia ID: 3mm 1/8 inch Outer Dia OD: 4mm5/32inch; Total Length: 3M/9.

9ft shore durometer a:30shorea-80shorea working temperature:-40°c-200°c package content: 3 meters silicone tubing generally used in home Brewing, coffee machine, water heaters, rice cookers and other connecting pipe, medical equipment connecting pipe, water dispensers, Milk bottle tube, conduit; casing and Instrument; electronic components, hose etc 5v 8-channel relay interface board, wine making, food machinery with connecting tube; drinking fountains, tube, and each one needs 15-20mA Driver Current.

Food Grade Silicone Rubber Tubing Auto Syphon Tube Pipe Hose ID 3mm OD 4mm 3 Meters #ad - Stock type: leds >> DotStar >> Strips. Anti-aging, no poison and no smell, flaming resistance, Ozone resistance, good heatproof, insulating, high voltage and cook for many times. Food grade hose pipe, water-fast, softness, It is harmless to health, odorlessness, safe, soft and flexible, non-toxic, durable.

Package included:3 Meters Silicone Rubber Tubing. Standard interface that can be controlled directly by microcontroller Arduino, DSP, PIC, AVR, ARM, 8051, ARM, MSP430, TTL logic. Indication LED's for Relay output status. In stock & Ready to Ship.

More information about Laimeisi #ad


Similar products



Yosoo 6v Dc DIY Dosing Pump Peristaltic Dosing Head for Aquarium/Chemical Lab Analytical Water

#ad
#ad
Yosoo . #ad - In stock & Ready to Ship. Equiped with high-current relay, AC250V 10A ; DC30V 10A. Suitable for aquarium, liquids, chemicals, dosing additives. Size: driver size(Φx h):dia. 32 x height 23mm pump head sizeΦx H:Dia. Stock type: leds >> DotStar >> Strips. Flow direction: you can control the flow direction by the positive and negative connect Silent work.

Standard interface that can be controlled directly by microcontroller Arduino, 8051, AVR, ARM, MSP430, PIC, ARM, DSP, TTL logic. Indication LED's for Relay output status. Pure silicone rubber, anti-oil and waterproof, softness, Harmless for health, Environmentally friendly non-toxic, durable. Low shrinkage, temperature resistance from -40~200 Celsius degree.

Yosoo 6v Dc DIY Dosing Pump Peristaltic Dosing Head for Aquarium/Chemical Lab Analytical Water #ad - 54 x height 46mm Installtion hole:47mm. Volts:dc 6v current:30ma working condition:0-40℃ relative humidity <80% Flow rate:20-60 ml/min Rotate speed:01-60 rpm weigh: 150g. Anti-aging, good heatproof, no poison and no smell, Ozone resistance, insulating, flaming resistance, high voltage and cook for many times.

Food grade hose pipe, soft and flexible, odorlessness, It is harmless to health, non-toxic, water-fast, softness, safe, durable. Package included:3 Meters Silicone Rubber Tubing.

More information about Yosoo . #ad


Similar products



Gikfun R385 Mini Aquarium Pump Fish Tank Motor 12V 1A US Plug 1m Tube Diaphragm Pump Water Air Pump Arduino EK1912

#ad
#ad
Esooho #ad - This product mainly used in the aquarium, watering, car washing, inflatable pool, experimental model, timing of mineral water filling etc. Specifications:operating voltage: DC6-12V recommended 9V1A 12V1AMaximum flow: 1. 5-1. 8l/mininlet pipe diameter: 5mm, Outer Diameter:8. 5mmthe pump size: 95mmLx47mmWx36mmH.

Ac/dc adaptorinput:100-240v acoutput:12v 1apackage include:1 x dc diaphragm pump1 x 12v 1a adaptor1m Water Tuber2 x Black silica gel fixed ring1 x Fixed Board 5v 8-channel relay interface board, and each one needs 15-20mA Driver Current. Standard interface that can be controlled directly by microcontroller Arduino, PIC, 8051, AVR, ARM, DSP, MSP430, ARM, TTL logic.

Gikfun R385 Mini Aquarium Pump Fish Tank Motor 12V 1A US Plug 1m Tube Diaphragm Pump Water Air Pump Arduino EK1912 #ad - Indication LED's for Relay output status. Suitable for aquarium, chemicals, liquids, dosing additives. This product mainly used in the aquarium, experimental model, inflatable pool, watering, car washing, timing of mineral water filling etc. Operating voltage: dc6-12V recommended 9V1A 12V1A. 1m water Tuber.

Equiped with high-current relay, AC250V 10A ; DC30V 10A. Size: driver size(Φx h):dia. 32 x height 23mm pump head sizeΦx H:Dia.

More information about Esooho #ad


Similar products



Learn To Brew LLC Food Grade Vinyl Tubing - 7/16 OD - 10 feet 5/16 ID

#ad
#ad
Beesclover 2Y-U7VC-TC1U #ad - Maximum flow: 1. 5-1. 8l/min. Fits tight around the racking cane, siphon pump, bottling cane and bottle spigot. 5v 8-channel relay interface board, and each one needs 15-20mA Driver Current. 1m water Tuber. Size: driver size(Φx h):dia. 32 x height 23mm pump head sizeΦx H:Dia. Suitable for aquarium, chemicals, liquids, dosing additives.

This product mainly used in the aquarium, watering, experimental model, inflatable pool, car washing, timing of mineral water filling etc. Operating voltage: dc6-12V recommended 9V1A 12V1A. Stock type: leds >> DotStar >> Strips. Standard interface that can be controlled directly by microcontroller Arduino, DSP, AVR, ARM, MSP430, ARM, PIC, 8051, TTL logic.

Learn To Brew LLC Food Grade Vinyl Tubing - 7/16 OD - 10 feet 5/16 ID #ad - Indication LED's for Relay output status. Adafruit part Number: 2238. In stock & Ready to Ship. This food grade, vinyl tubing is 5/16 inch inside diameter and 7/16 inch outside diameter and fits tight around the racking cane, Siphon pump, bottling cane and bottle Spigot. Food grade vinyl tubing. Flow direction: you can control the flow direction by the positive and negative connect Silent work.

12v 1a adaptor.

More information about Beesclover 2Y-U7VC-TC1U #ad


Similar products



Gikfun Mini DC 6V to 12V R385 Aquarium Fish Tank Water Cooled Water Air Diaphragm Pump EK1856

#ad
#ad
Esooho #ad - 54 x height 46mm Installtion hole:47mm. Equiped with high-current relay, AC250V 10A ; DC30V 10A. 1m water Tuber. Size: driver size(Φx h):dia. 32 x height 23mm pump head sizeΦx H:Dia. 5v 8-channel relay interface board, and each one needs 15-20mA Driver Current. Stock type: leds >> DotStar >> Strips. Pure silicone rubber, harmless for health, softness, anti-oil and waterproof, Environmentally friendly non-toxic, durable.

Low shrinkage, temperature resistance from -40~200 Celsius degree. 12v 1a adaptor. Working voltage: dc 6-12v, maximum flow: 1. 5-1. 8l/min. Maximum flow: 1. 5-1. 8l/min. This product mainly used in the aquarium, inflatable pool, car washing, watering, experimental model, timing of mineral water filling etc.10 feet. Adafruit part Number: 2238.

Gikfun Mini DC 6V to 12V R385 Aquarium Fish Tank Water Cooled Water Air Diaphragm Pump EK1856 #ad - Fits tight around the racking cane, siphon pump, bottling cane and bottle spigot. Specifications: working voltage: DC 6-12V Maximum flow: 1.

More information about Esooho #ad


Similar products



Connectors Included - Hadronix 1/4 Quick-Connect Food-Grade Water Flow Meter Hall Sensor HDRX-YF-S402B - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible

#ad
#ad
Hadronix #ad - Flow direction: you can control the flow direction by the positive and negative connect Silent work. Stock type: leds >> DotStar >> Strips. The design of the black silicone case has a fixed effect, and mainly plays the role of shockproof and silent. Inlet pipe diameter: 5mm. Pure silicone rubber, harmless for health, softness, anti-oil and waterproof, Environmentally friendly non-toxic, durable.

Low shrinkage, temperature resistance from -40~200 Celsius degree. 54 x height 46mm Installtion hole:47mm. It has 3. 5 - 12vdc supply voltage range and is perfect for use in DIY home automation, irrigation, filtration projects and more powered by Arduino and Raspberry Pi. 10 feet. Volts:dc 6v current:30ma working condition:0-40℃ relative humidity <80% Flow rate:20-60 ml/min Rotate speed:0

Connectors Included - Hadronix 1/4 Quick-Connect Food-Grade Water Flow Meter Hall Sensor HDRX-YF-S402B - Arduino, Raspberry Pi, and Reverse Osmosis Filter Compatible #ad - 1-60 rpm weigh: 150g. 1m water Tuber. In stock & Ready to Ship. Included with this flow meter is the jst-XH mating connector helps you to get started working with the HDRX YF-S402B right away. 12v 1a adaptor. Food grade vinyl tubing.

More information about Hadronix #ad


Similar products



uxcell Silicone Tube 1mm ID X 2mm OD 16.4' Flexible Silicone Rubber Tubing Water Air Hose Pipe Transparent for Pump Transfer

#ad
#ad
uxcell a16090800ux0405 #ad - 5v 8-channel relay interface board, and each one needs 15-20mA Driver Current. The tubes are able to withstand a high temperature of 200C intermittent and are available in various internal diameters and wall thickness. 54 x height 46mm Installtion hole:47mm. Equiped with high-current relay, AC250V 10A ; DC30V 10A.

This product mainly used in the aquarium, car washing, experimental model, inflatable pool, watering, timing of mineral water filling etc. The pump size: 95mmLx47mmWx36mmH. Food grade; Liquid passed through is safe to drink. Works with pressures up to 116 pounds per square inch and flow rates of 03 - 6 liters per minute.

uxcell Silicone Tube 1mm ID X 2mm OD 16.4' Flexible Silicone Rubber Tubing Water Air Hose Pipe Transparent for Pump Transfer #ad - 12v 1a adaptor. Fits tight around the racking cane, siphon pump, bottling cane and bottle spigot. Transparent silicone tube is designed for a variety of pump and transfer applications including, laboratory, bioprocess manufacturing and food and beverage applications. 3. 5 - 12 volt supply voltage range; Devices below 3.

5 volts can be supported with a simple not included voltage divider circuit. In stock & Ready to Ship.

More information about uxcell a16090800ux0405 #ad


Similar products



Qunqi IIC/I2C/TWI 1602 Serial Blue Backlight LCD Module for Arduino UNO R3 MEGA2560

#ad
#ad
Qunqi MMK-143 #ad - 54 x height 46mm Installtion hole:47mm. Operate Voltage: 5V. Transparent silicone rubber tube - will withstand repeated use and for visual inspection of fluids. Size: 1x2mminner dia*outer dia; length: 5M16. 4'; wall thickness: 05mm002". Adafruit part Number: 2238. 1/4" od quick-connect; easy installation and removal, and works with most Reverse Osmosis filtration systems.

Stock type: leds >> DotStar >> Strips. Flow direction: you can control the flow direction by the positive and negative connect Silent work. Includes 3-pin male 01" pitch jst-xh mating connector; Perfect for use on a breadboard with Arduino or Raspberry Pi. The design of the black silicone case has a fixed effect, and mainly plays the role of shockproof and silent.

Qunqi IIC/I2C/TWI 1602 Serial Blue Backlight LCD Module for Arduino UNO R3 MEGA2560 #ad - Inlet pipe diameter: 5mm. Good electrical and weather ability properties - resists u. V. Ozone, gases, and moisture. Silicone tubing - great for fluid handling, peristaltic pumps, draining, siphoning, aquaponics and water/oil change, etc.100% brand New.

More information about Qunqi MMK-143 #ad


Similar products