#ad
#ad
Pneumatic Plus #ad - Reinforced for extra strength, ideal for -40 to 190 Fahrenheit temperature range. Creates a flexible connection from rigid supply line to hose reel to isolate vibrations. Max. Pressure: 300 PSI. Continental contitech red hose: 3 feet, 3/4" id x 1. 15" od hose with 3/4" Male NPT Connector. The contitech frontier air, water, & Multipurpose Hose is designed to meet these need using EPDM synthetic rubber technology.

More information about Pneumatic Plus #ad

Maxline M7500 Master Kit, 3/4-Inch x 100-Feet

#ad
#ad
Rapidair Maxline M7500 #ad - Reduce shop clutter with this industrial compressed air piping system. Set up a compressed air system with the 3/4-Inch Maxline Master Kit with 3 air outlet locations. Simply cut the tubing to length, insert in the fitting and tighten. Kit includes: 100 ft; of 3/4-inch tubing, 3 air outlet kits, 20 Pipe Clips, 3/4-inch straight fitting, 2 Tee Fittings, Debar and Cutter Tool.

175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. The maxline tubing has an aluminum core sandwiched between an inner and outer layer of polyethylene. Tubing holds any hand bent shape. Easy to expand with more air outlet locations or modify later. Compression style nickel plated brass fittings.

Maxline M7500 Master Kit, 3/4-Inch x 100-Feet #ad - Use only with Maxline 3/4-Inch system. No glue, soldering or crimping needed. Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor. Tubing can be mounted on wall surfaces, in wall, or buried underground or concrete.

More information about Rapidair Maxline M7500 #ad


Similar products



HEAVY DUTY COMPRESSED AIR FILTER REGULATOR COMBO PIGGYBACK, METAL BOWL, 3/4" NPT PORTS, 140 CFM, VISIBLE SIGHT GLASS, 5 MICRON ELEMENT

#ad
#ad
T-H-B CO EDGE INDUSTRIAL #ad - Piggybacks are compact design and most effective when space is a constraint. 5 ounce metal bowl with visible sight glass, 140 scfm flow rate. Suitable for any 3/4" high flow air pressure equipment or system. Filter-regulator, or "piggybacks, " combine the functions of both a filter & regulator. Manual drain. Adjusts 7 psi to 215 psi, high impact locking composite knob, 5 micron filter element.

. Compressed air filters, also known as line filters, remove contaminates from the compressed air leaving a screw or piston compressor, which often has a high water content and concentration of oil or other contaminants. Compressed air in-line filters extend the life of your tools and equipment down stream.

HEAVY DUTY COMPRESSED AIR FILTER REGULATOR COMBO PIGGYBACK, METAL BOWL, 3/4" NPT PORTS, 140 CFM, VISIBLE SIGHT GLASS, 5 MICRON ELEMENT #ad - 3/4" npt outside thread diameter in inches 1. 05". Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor. For replacement 5 micron filter elements. Regulator - can make sure the output/working pressure is in a certain level.

More information about T-H-B CO EDGE INDUSTRIAL #ad


Similar products



Maxline M8067 Elbow Fitting for 3/4-Inch Tubing

#ad
#ad
Rapidair Maxline M8067 #ad - Use only with Maxline 3/4-Inch system. Kit includes: 100 ft; of 3/4-inch tubing, 20 pipe clips, 2 Tee Fittings, 3/4-inch straight fitting, 3 Air Outlet Kits, Debar and Cutter Tool.175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. Use only with Maxline 3/4-Inch system. Simply cut the tubing to length, insert in the fitting and tighten.

Adjusts 7 psi to 215 psi, high impact locking composite knob, 5 micron filter element. Heavy duty 3/4" female npt in line compressed air filter regulator piggy back. 250 psi max input pressure, 215 max output pressure, wall mounting bracket & gauge included. 175 psi maximum working pressure. The maxline 3/4-inch tubing x 3/4-Inch tubing, Elbow fitting, features a compression fitting style to make fast and easy connections.

Maxline M8067 Elbow Fitting for 3/4-Inch Tubing #ad - Nickel plated brass fitting guards against corrosion. 3/4" npt outside thread diameter in inches 1. 05". 5 ounce metal bowl with visible sight glass, 140 scfm flow rate. There is no glue, soldering or crimping needed. Recommended usage 150 ft.

More information about Rapidair Maxline M8067 #ad


Similar products



Maxline M8011 Equal Tee Fitting for 3/4-Inch Tubing

#ad
#ad
Rapidair Maxline M8011 #ad - 250 psi max input pressure, 215 max output pressure, wall mounting bracket & gauge included. Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor. Kit includes: 100 ft; of 3/4-inch tubing, 20 pipe clips, 3/4-inch straight fitting, 2 Tee Fittings, 3 Air Outlet Kits, Debar and Cutter Tool.

175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. 5 ounce metal bowl with visible sight glass, 140 scfm flow rate. Compression style nickel plated brass fittings. Heavy duty 3/4" female npt in line compressed air filter regulator piggy back. Use only with Maxline 3/4-Inch system.

Maxline M8011 Equal Tee Fitting for 3/4-Inch Tubing #ad - Use only with Maxline 3/4-Inch system. 3/4" npt outside thread diameter in inches 1. 05". There is no glue, soldering or crimping needed. The maxline 3/4-inch tubing x 3/4-inch tubing x 3/4-Inch tubing, Tee fitting, features a compression fitting style to make fast and easy connections. 175 psi maximum working pressure.

More information about Rapidair Maxline M8011 #ad


Similar products



Maxline M8003 Straight Fitting for 3/4-Inch Tubing with 3/4-Inch Male NPT Thread

#ad
#ad
Rapidair Maxline M8003 #ad - Kit includes: 100 ft; of 3/4-inch tubing, 20 pipe clips, 3/4-inch straight fitting, 2 Tee Fittings, 3 Air Outlet Kits, Debar and Cutter Tool.175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. Heavy duty 3/4" female npt in line compressed air filter regulator piggy back.

Double o-ring compression style fitting, tubing can be removed from fitting if needed. Use only with Maxline 3/4-Inch system. 250 psi max input pressure, 215 max output pressure, wall mounting bracket & gauge included. Nickel plated brass fitting guards against corrosion. Double o-ring compression style fitting, tubing can be removed from fitting if needed.

Maxline M8003 Straight Fitting for 3/4-Inch Tubing with 3/4-Inch Male NPT Thread #ad - The maxline 3/4-inch tubing x 3/4-inch Male NPT adapter fitting, features a compression fitting style to make fast and easy connections. 5 ounce metal bowl with visible sight glass, 140 scfm flow rate. Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor.

Adjusts 7 psi to 215 psi, high impact locking composite knob, 5 micron filter element.

More information about Rapidair Maxline M8003 #ad


Similar products



Maxline M7510 Outlet Kit for 3/4-Inch Tubing with 1/2-Inch NPT Outlet Port

#ad
#ad
Rapidair Maxline M7510 #ad - Use for wall or ceiling mount applications. Double o-ring compression style fitting, tubing can be removed from fitting if needed. Includes moisture drain. Use only with Maxline 3/4-Inch system. 5 ounce metal bowl with visible sight glass, 140 scfm flow rate. Use only with Maxline 3/4-Inch system. Compression style nickel plated brass fittings.

Kit includes: aluminum block, M8005 Maxline adapter fitting, drain and plug for unused port. 175 psi maximum working pressure. Adjusts 7 psi to 215 psi, high impact locking composite knob, 5 micron filter element. Double o-ring compression style fitting, tubing can be removed from fitting if needed. 175 psi maximum working pressure.

Maxline M7510 Outlet Kit for 3/4-Inch Tubing with 1/2-Inch NPT Outlet Port #ad - Use only with Maxline 3/4-Inch system. Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor. Double o-ring compression style fitting, tubing can be removed from fitting if needed. 175 psi maximum working pressure.

More information about Rapidair Maxline M7510 #ad


Similar products



Maxline M8005 Straight Fitting for 3/4-Inch Tubing with 1/2-Inch Male NPT Thread

#ad
#ad
Rapidair Maxline M8005 #ad - Adjusts 7 psi to 215 psi, high impact locking composite knob, 5 micron filter element. 175 psi maximum working pressure. Compression style nickel plated brass fittings. Kit includes: aluminum block, M8005 Maxline adapter fitting, drain and plug for unused port. Double o-ring compression style fitting, tubing can be removed from fitting if needed.

Double o-ring compression style fitting, tubing can be removed from fitting if needed. Simply cut the tubing to length, insert in the fitting and tighten. Double o-ring compression style fitting, tubing can be removed from fitting if needed. Kit includes: 100 ft; of 3/4-inch tubing, 2 tee fittings, 3/4-inch straight fitting, 20 Pipe Clips, 3 Air Outlet Kits, Debar and Cutter Tool.

Maxline M8005 Straight Fitting for 3/4-Inch Tubing with 1/2-Inch Male NPT Thread #ad - 175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. Use only with Maxline 3/4-Inch system. Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor. 175 psi maximum working pressure.

More information about Rapidair Maxline M8005 #ad


Similar products



Rapidair K93217 NPT Filter Regulator, 3/4-Inch

#ad
#ad
Rapid Air K93217 #ad - Kit includes: 100 ft; of 3/4-inch tubing, 3 air outlet kits, 3/4-inch straight fitting, 20 Pipe Clips, 2 Tee Fittings, Debar and Cutter Tool.175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter. Double o-ring compression style fitting, tubing can be removed from fitting if needed.

5 micron Filter. 3/4" npt outside thread diameter in inches 1. 05". Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor. Nickel plated brass fitting guards against corrosion. Use only with Maxline 3/4-Inch system. Use only with Maxline 3/4-Inch system. Anodized Aluminum.

Rapidair K93217 NPT Filter Regulator, 3/4-Inch #ad - Kit includes: aluminum block, M8005 Maxline adapter fitting, drain and plug for unused port. Heavy duty 3/4" female npt in line compressed air filter regulator piggy back. Includes mounting Bracket and Square Embedded Pressure Gauge. Use only with Maxline 3/4-Inch system. This combination filter regulator is a space saving design, combining both operations into one unit.

More information about Rapid Air K93217 #ad


Similar products



Poly Bowl, Manual Drain, Bracket, Gauge - PneumaticPlus SAU420-N06G Compressed Air Filter Regulator Combo 3/4" NPT

#ad
#ad
PneumaticPlus #ad - Nickel plated brass fitting guards against corrosion. Double o-ring compression style fitting, tubing can be removed from fitting if needed. Double o-ring compression style fitting, tubing can be removed from fitting if needed. Use only with Maxline 3/4-Inch system. The saf filter comes standard with a 10 Micron Particulate element that removes harmful debris and moisture.

Kit includes: aluminum block, M8005 Maxline adapter fitting, drain and plug for unused port. Use metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present. Diverter blocks may be used to supply air to secondary locations. Includes mounting Bracket and Square Embedded Pressure Gauge.

Poly Bowl, Manual Drain, Bracket, Gauge - PneumaticPlus SAU420-N06G Compressed Air Filter Regulator Combo 3/4" NPT #ad - Nickel plated brass fitting guards against corrosion. Flow direction is Reversible by Relocating Gauge to Opposite side. Sar regulators can be mounted either up or down, and the pressure is controlled using the adjustable locking knob. Manual drain, poly bowl w/ metal Guard, Port Size: 3/4" NPT. Sal lubricators can be adjusted easily to specifications of your tools and applications for proper protection.

Do not install a polycarbonate bowl in pressures that exceed 150 psi or where there is a presence of solvents harmful to polycarbonate. Double o-ring compression style fitting, tubing can be removed from fitting if needed.

More information about PneumaticPlus #ad


Similar products



Maxline M8065 Pipe Clip for 3/4-Inch Tubing, 10-Pack

#ad
#ad
Rapidair Maxline M8065 #ad - The maxline 3/4-inch tubing, plastic tubing Clamp 10-Pack, is designed to mount 3/4-Inch Maxline, tubing. Anodized Aluminum. 175 psi maximum working pressure. Pressure gauge, T-Bracket Included Shown in the product picture. Maximum inlet pressure 175 psi, Operating range 0-150 psi. Front, top and back of block are ported 1/2-Inch female NPT thread.

Use only with Maxline 3/4-Inch system. Single mounting screw hole. Nickel plated brass fitting guards against corrosion. Double o-ring compression style fitting, tubing can be removed from fitting if needed. Recommended usage 150 ft. Maximum from the air compressor, up to 4000 sq. Ft. Buildings, up to 10-HP air compressor.

Maxline M8065 Pipe Clip for 3/4-Inch Tubing, 10-Pack #ad - Operating pressure: 0-150 PSI. 3/4" npt outside thread diameter in inches 1. 05". Adjusts 7 psi to 215 psi, high impact locking composite knob, 5 micron filter element. Manual drain and Metal Bowl Guard. Use only with Maxline 3/4-Inch system.

More information about Rapidair Maxline M8065 #ad


Similar products