As an Amazon Associate I earn from qualifying purchases.
Ximimark #ad - Jc's esdg corresponds to the EnableStepDirGnd drive signal output on the connection. The a4988/drv8825 can be used, pay attention to the direction when inserting, otherwise the drive may be burnt.
THETWOO #ad - 6 microstep resolutions stepper motor driver module choose from full step, 1/16-step, half step, 1/4-step, 1/8-step, and 1/32-step resolutions for even finer control over your 3D prints.
Adjustable current control set the potentiometer to use the stepper motor's rated voltage or more, achieving a higher rate of maximum output current step. Enhance your 3d printing experience upgrade your 3D printer with 5 DRV8825 Stepper Motor Driver Module for smoother, more precise movements.
Naroote #ad - The drv8825 stepper motor driver module carrier board TI DRV8825 micro bipolar stepper motor driver. The drv8825 stepper motor driver module carrier board TI DRV8825 micro bipolar stepper motor driver.
Using 8. 2-45 v, can provide up to about 1. 5 per phase without heat sink or forced air flow. Drv8825 has adjustable current limit, overcurrent and overheat protection, six micro resolutions downward 1/32‑step.
Shanrya #ad - Including 3pcs stepper motor driver modules, standard workmanship can provide stable performance. Drv8825 has adjustable current limit, overcurrent and overheat protection, six micro resolutions downward 1/32‑step.
Using 8. 2-45 v, can provide up to about 1. 5 per phase without heat sink or forced air flow. The module has a pin distribution and interface that is almost the same as the carrier of the A4988 stepper motor driver, and can be used as a replacement for these boards in a higher performance drop‑down menu in many applications.
Naroote #ad - Including 3pcs stepper motor driver modules, standard workmanship can provide stable performance. Using 8. 2-45 v, can provide up to about 1.
5 per phase without heat sink or forced air flow. The module has a pin distribution and interface that is almost the same as the carrier of the A4988 stepper motor driver, and can be used as a replacement for these boards in a higher performance drop‑down menu in many applications.
5?built-in regulator no external logic voltage supply needed, 7?Over-temperature thermal shutdown, 6?Can interface directly with 3. 3 v and 5 v systems, over-current shutdown, and under-voltage lockout. 1?simple step and direction control interface, 2?six different step resolutions: full-step, 1/4-step, half-step, 1/8-step, and 1/32-step, 1/16-step, .
5?built-in regulator no external logic voltage supply needed, 7?Over-temperature thermal shutdown, over-current shutdown, 6?Can interface directly with 3.3
11?module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects see the bottom of this page for more information.
CXTU #ad - Support ramps 1. 4, 12864lcd, 2004lcd, tft28 and TFT32. Available to input 24v, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
Eason #ad - Suitable for step motor:nema17, 23 42, 57 type 2 phase 4 phase 4 / 6 / 8 wires. The subdivision is increased to 32 subdivision, which is suitable for high subdivision. This driver is an upgraded version of TB6600 and with plastic cover.
Usongshine #ad - The largest 32 subdivision of the 6 models are optional; suitable for 4wires, With 1-2, W1 -2, 2W1 -2, 6 wires and 8 wires stepper motor. The maximum 4. 0a of the eight kinds of output current.
Package included: 1 x Stepper Motor Driver. It can control 2 phase stepper motor forward and reverse rotation, 4W1 -2 phase excitation mode. Stepper motor driver: 9v-42v dc power supply, H bridge bipolar constant phase flow drive.
1. Ximimark
#adXimimark A4988 DRV8825 3D Printer Stepper Motor Driver Control Extension Shield Board 3Pcs
#adMore information #ad
Jm connects the motor. The position where the jumper hits the ON DP indicates 16 subdivisions 4988 or 32 subdivisions 8825. Jv connects 5v and 12V-24V power supplies.| Brand | Ximimark #ad |
| Manufacturer | Ximimark #ad |
| Part Number | LY211 |
| Model | LY211 |
More information #ad
2. THETWOO
#ad5pcs DRV8825 Stepstick Stepper Motor Driver Module,2.5A / 3.3-5V 3D Printer Parts Stepper Motor Driver Module with Heat Sink for Mendel/Ultimak/Printbot/Makerb
#adAdjustable current control set the potentiometer to use the stepper motor's rated voltage or more, achieving a higher rate of maximum output current step. Enhance your 3d printing experience upgrade your 3D printer with 5 DRV8825 Stepper Motor Driver Module for smoother, more precise movements.
More information #ad
Overcurrent and overtemperature Protection DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, ensuring safe and reliable operation. Easy to install the drv8825 module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, making it a higher-performance drop-in replacement for those boards in many applications.| Brand | THETWOO #ad |
| Manufacturer | THETWOO #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.15 Pounds |
| Width | 0 Inches |
| Part Number | THETWOOgdtkq2o1sx |
More information #ad
3. Naroote
#ad3D Printer Stepper Motor Driver Module, DRV8825 Stepper Motor Driver Module 4-Layer DRV8825 for Overcurrent Overheat Protection for StepStick
#adUsing 8. 2-45 v, can provide up to about 1. 5 per phase without heat sink or forced air flow. Drv8825 has adjustable current limit, overcurrent and overheat protection, six micro resolutions downward 1/32‑step.
More information #ad
The module has a pin distribution and interface that is almost the same as the carrier of the A4988 stepper motor driver, and can be used as a replacement for these boards in a higher performance drop‑down menu in many applications.| Brand | Naroote #ad |
| Manufacturer | Meiyya #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Weight | 0.03 Pounds |
| Width | 0.39 Inches |
| Part Number | Meiyya1sohep6fm82144 |
More information #ad
4. Shanrya
#adStepper Motor Driver Module, Purple+Black 4-Layer DRV8825 PCB Stepper Motor Driver Module for Overcurrent Overheat Protection for StepStick
#adUsing 8. 2-45 v, can provide up to about 1. 5 per phase without heat sink or forced air flow. The module has a pin distribution and interface that is almost the same as the carrier of the A4988 stepper motor driver, and can be used as a replacement for these boards in a higher performance drop‑down menu in many applications.
More information #ad
The drv8825 stepper motor driver module carrier board TI DRV8825 micro bipolar stepper motor driver.| Brand | Shanrya #ad |
| Manufacturer | Shanrya #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Weight | 0.03 Pounds |
| Width | 0.39 Inches |
| Part Number | Shanryae4vmnwio2c1766 |
More information #ad
5. Naroote
#adDRV8825 3D Printer Stepper Motor Driver Module Purple+Black 4-Layer for StepStick, Stepper Motor Driver Module
#ad5 per phase without heat sink or forced air flow. The module has a pin distribution and interface that is almost the same as the carrier of the A4988 stepper motor driver, and can be used as a replacement for these boards in a higher performance drop‑down menu in many applications.
More information #ad
The drv8825 stepper motor driver module carrier board TI DRV8825 micro bipolar stepper motor driver. Drv8825 has adjustable current limit, overcurrent and overheat protection, six micro resolutions downward 1/32‑step.| Brand | Naroote #ad |
| Manufacturer | Wosune #ad |
| Height | 0.39 Inches |
| Length | 0.39 Inches |
| Weight | 0.03 Pounds |
| Width | 0.39 Inches |
| Part Number | Wosune1efbzu35cg2359 |
More information #ad
6. ManeePowerAlice
#adArduino DRV8825 stepper motor driver Module 3D printer RAMPS1.4 RepRap StepStick
#adManeePowerAlice #ad - 11?module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects see the bottom of this page for more information. 3?adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates, 4?45 V maximum supply voltage.More information #ad
8?short-to-ground and shorted-load protection, 9?4-layer, 2 oz copper PCB for improved heat dissipation, 10?Exposed solderable ground pad below the driver IC on the bottom of the PCB.55?built-in regulator no external logic voltage supply needed, 7?Over-temperature thermal shutdown, 6?Can interface directly with 3. 3 v and 5 v systems, over-current shutdown, and under-voltage lockout. 1?simple step and direction control interface, 2?six different step resolutions: full-step, 1/4-step, half-step, 1/8-step, and 1/32-step, 1/16-step, .
| Brand | ManeePowerAlice #ad |
| Manufacturer | ManeePowerAlice #ad |
| Part Number | Module 0725 |
More information #ad
7. ManeePowerAlice
#ad5PCS DRV8825 stepper motor driver Module 3D printer RAMPS1.4 RepRap StepStick
#adManeePowerAlice #ad - 8?short-to-ground and shorted-load protection, 2 oz copper PCB for improved heat dissipation, 9?4-layer, 10?Exposed solderable ground pad below the driver IC on the bottom of the PCB.1?simple step and direction control interface, 1/16-step, 1/8-step, half-step, 1/4-step, 2?Six different step resolutions: full-step, and 1/32-step, .5?built-in regulator no external logic voltage supply needed, 7?Over-temperature thermal shutdown, over-current shutdown, 6?Can interface directly with 3.3
More information #ad
3 v and 5 v systems, and under-voltage lockout. 3?adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates, 4?45 V maximum supply voltage. 11?module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects see the bottom of this page for more information.
| Brand | ManeePowerAlice #ad |
| Manufacturer | ManeePowerAlice #ad |
| Part Number | Module 0726 |
More information #ad
8. CXTU
#adCXTU MKS-GEN L Integrated Controller Mainboard V1.0 + 5pcs DRV8825 Stepper Motor Driver Compatible Ramps1.4/Mega2560 R3 for 3D Printer Driver Modules
#adMore information #ad
Run marlin firmware, the configuration is completely same as Ramps 1. 4, and available to directly replace the Ramps 1. 4. X axis, y axis and z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.| Brand | CXTU #ad |
| Manufacturer | CXTU #ad |
| Weight | 1.1 Pounds |
More information #ad
9. Eason
#adEASON Stepper Motor Driver TB6600 4A DC9-42V 32 Subdivision for Nema 17, 23 Series Stepper Motor CNC Controller Single Axis Hybrid MicroStepping
#adMore information #ad
Suitable for any small-and-medium automatic equipment with CNC controller, engraving machines, labeling machines, such as X-Y-Z tables, laser cutters, and pick-place devices. Suitable for drive two-phase stepping motor dynamic voltage 9V to 42V, the maximum drive current is less than 4A.| Brand | Eason #ad |
| Manufacturer | Yisheng Technology #ad |
| Height | 0 Inches |
| Length | 3.74 Inches |
| Weight | 0.27 Pounds |
| Width | 0 Inches |
More information #ad
10. Usongshine
#adUsongshine TB6600 4A 9-42V Nema 17 Stepper Motor Driver CNC Controller Single Axes Phase Hybrid Stepper Motor for CNC/42 57 86 Stepper Motor（1 pcs
#adPackage included: 1 x Stepper Motor Driver. It can control 2 phase stepper motor forward and reverse rotation, 4W1 -2 phase excitation mode. Stepper motor driver: 9v-42v dc power supply, H bridge bipolar constant phase flow drive.
More information #ad
Protect form: energy-saving semi-automatic current lock function, under voltage protection, built-in temperature protection and over current protection, Preventing reverse. Suitable for a wide range of stepping motors of nema 17, such as X-Y-Z tables, engraving machines, labeling machines, laser cutters, 23 and 24 can used in various kinds of machines, pick-place devices and so on.| Brand | Usongshine #ad |
| Manufacturer | Usongshine #ad |
| Part Number | 6596 |
| Model | TB6600-4A |
More information #ad
