Top 9 Splice T Connector – Clothes Dryer Replacement Vents

As an Amazon Associate I earn from qualifying purchases.



Duct Splitter for Dryer Vent Hose 4 inch, A-KARCK 3 Way Y Shape Duct Hose Connector for Exhaust Fan Hose, Galvanized Steel Prevent Air Leakage

A-KARCK #ad - 3-way splitter: suitable for exhaust hoses, used to connect to exhaust fans, dryer vent covers and vent seals. Then install the clamp and tighten the screws.

Prevent leakage: made of seamlessly connected galvanized steel. Applicable both outdoors and indoors. Great airtightness: The gap is bonded with sealant to effectively maintain great air tightness and prevent leakage. Save space: compared with directly connecting the hose, the adapter takes up less space and reduces the wind resistance. Easy to install: butt it with the hose and fix it with aluminum foil tape. With two branches for building an exhaust system.
BrandA-KARCK #ad
ManufacturerA-KARCK #ad
Height4.5 Inches
Length9.6 Inches
Width9.4 Inches
Part NumberNTEA-10

2. Deflecto


Aluminum with Bead and Crimp, Deflecto 4” Duct Connector, Silver, 3” long DAC4C

Deflecto #ad - Crimped ends allow for easy installation, simply slide the ducts over each end and fasten into place. Maximum working pressure of 80 psi; maximum velocity of 5, 000 FPM; Operating temperature range of -100 to 430 degrees F. For joining together round ducting, our 4” one piece aluminum duct connector is an ideal solution. Designed with a bead in the middle to give extra strength to your connection, which helps prolong use. Constructed of fire resistant aluminum.
BrandDeflecto #ad
ManufacturerDeflect-o Products #ad
Height4 Inches
Length3 Inches
Weight0 Pounds
Width4 Inches
Part NumberVENDAC4
WarrantyAs listed.

3. Metpure


1/4" Fittings for Potable Drinking Water, Metpure Ice Maker Fridge Installation Kit – 25' Feet Tubing for Appliance Water Line with Stop Tee Connection and Valve for Quick Installation

Metpure #ad - The heavy duty universal brass valve adapter is lead free to ensure the drinking water that passes through is safe and in compliance with the federal act of Low Lead Content in potable water. Versatility: this kit is great for a wide variety of applications. Moreover, saving you unnecessary trips to the hardware store for conversion adapters. Complete ice maker water line kit: this kit comes complete with a 25' white tubing, heavy duty brass universal adapter tee with 1/4" shut off valve at the water supply end, and a 1/4" quick connect adapter at the appliance connection end.

Easy installation: the installation is a breeze with metpure icemk2514 kit. No odor, no bad taste, certified by nsf to ensure safety for potable drinking water, and non-toxic: the tubing, contains no toxic material and will leave no odor or plastic taste in the water. The adapter universally fits both existing supply valve and line, the water can be turned off with the valve. It is the perfect material of choice for running fridge water line by professionals due to its high bendability, pliability, and yield that high density PEX line WILL NOT provide.

This kit was put together by field technicians and plumbers to ease their onsite installation and now it is available to the general public. Super durability: linear low density polyethylene lldpe line is extremely flexible, crack and impact resistant. Also the kit comes with a shut off valve so in case maintenance is needed, the kit comes with a quick connect female adapter that you simply screw on the end of your point of use without any tools required. Connect at any water source with an existing water supply shut off valve & line and run the tubing to your freezer, humidifer, coffee brewer, ice maker, water dispenser, refrigerator, water filtration inlet, drinking fountain, and many more.
BrandMetpure #ad
ManufacturerMetpure #ad
Part NumberICEMK2514



Hose to Hose Dryer Coupler Adapter for Extending Dryer Hoses by Ziggurat Products

ZIGGURAT PRODUCTS #ad - Extend your reach: the ziggurat hose-to-hose connector was designed to make extending your hose reach simple. Pair your hose-to-Hose connector with another product to simplify your laundry room needs. Make it easy: our tool-less design makes joining vent hoses effortless.

Made of strong abs plastics and Polypropylene, our Snap-to-Vent Systems are sure to withstand anything you throw at them. No screwdrivers, wrenches, or power tools. Pair with other ziggurat products: we make a variety of products designed to make your duct work simple. Just line up any two hoses with our system and use the coupler to snap them together.

We design our products to work with any 4" diameter hoses. Multiple uses: use the hose-to-hose to connect dryer hoses, bathroom fan hoses, insulated hoses, ventilation hoses, or extending a run through attics. Built to last: ziggurat products are designed to be durable and long lasting. Built with our unique snap-together system, extending any 4" dryer hose just got way easier.
ManufacturerZiggurat Products #ad
Height6 Inches
Length9 Inches
Weight5.7 ounces
Width6 Inches
Part NumberSTV-H2H

5. Dryer Dock


Two-Piece Dryer Hose Quick-Connect, Fits 4 Inch Tubes, Twist & Lock Tight, Dryer Dock The Original Dryer Vent Quick Release

Dryer Dock #ad - This unique solution is easy to install, saves space behind the dryer, looks great when installed, and makes maintenance a snap. Keeping the vent clean, saves energy, and prevents dryer fires. Dryerdock quick-connect - it is the easiest way to connect your dryer's vent to your house vent.

Prevents fires - according to the national fire protection association, 000 home dryer fires are reported each year, causing around 51 deaths, dryer vent fires are the number one cause of household fires, 380 injuries, nearly 17, and $236 million in property loss. Eliminates environmental intrusion - made of rigid abS plastic and fastens together with a slight twist, eliminates air drafts, saves energy, pest intrusion, the rigid design keeps the hose securely in place, wear and tear on both dryer and clothes.

Fits 4" tubes with a 6" flange. Dryer dock is the “gold standard” of quick release in the industry for home and commercial applications, 000 homes, it is installed in more than 500, and offices. The original dryer dock - patented under usp # 6, 131, factories, 958. Easy maintenance - dryer dock is a two-piece “quick release System” that enables quick access to your dryer vent hose and vent pipe, allowing for easy removal and cleaning. Proudly made in the USA.
BrandDryer Dock #ad
ManufacturerVentpro Inc #ad
Height6 Inches
Length3 Inches
Weight0.3 Pounds
Width6 Inches
Part Number5000-1

6. TonGass


And 3 Spring Clamps, TonGass DWC-00 Dishwasher Connector Kit, 1 Inlet Connector, 1 Hose Clamp, Easiest and Fastest Dishwasher Drain and Disposal Connector

TonGass #ad - Fastest and easiest dishwasher drain and disposal connector - the kit fits most models of household disposers regardless of horsepower. 1 inlet connector, and 3 spring clamps - everything you’ll need to connect your dishwasher drain to the disposer is in this kit.

Complete set for a fraction of the cost - high quality for a more affordable price! 30-day money-back guarantee - shop without worries! don’t need the product after all? You can request for a return within 30 days after receiving your order. This is definitely the most hassle-free way to connect your dishwasher drain to the disposer. With a tapered design, the connector can fit on either a 1/2 inch, 5/8 inch, or a 3/4 inch hose. Made from flexible rubber, 1 hose clamp, you can secure the connector to the disposer inlet pipe with the hose clamp while secure the other end to the dishwasher drain line with a spring clamp.

Durable connector kit - this dw-00 Dishwasher Connector Kit made by high-end materials, it’s more durable than the original. The inlet connector has a 3/4” inner diameter on one end and a 1 inch inner diameter on the other end. Do you need assistance? You can contact our US-based customer service team for your questions and complaints.
BrandTonGass #ad
ManufacturerTonGass #ad
Part NumberDC1PK



2172937, PS1173898, 6005924, AP6005924, Lid Switch Connector Wire Harness for Whirlpool WP2172937

TERUIPE #ad - Please check picture and fitment information before placing order. Please feel free to contact us via Email if any quality problem or dissatisfaction occurs. Failing lid switches are the source of the heat that melted the connector.

If your machine is not draining, when the lid switch is broken the machine won't advance past the FILL stage, or spin cycle, you could have a broken lid switch. Lid switch connector with terminals and flying wire leads, as well as sealing connectors for installation. As a safety feature, or not moving on to the agitating cycle, and also needed a connector because it was burnt up and fused to the switch. If you repair the connector and do not replace the lid switch, you will melt the new connector. Fit for whirlpool  wp2172937, ps1173898 agitator washing machine, 6005924, 2172937, ap6005924, combination washer/dryer, Stacked Washer & Dryer.
BrandTERUIPE #ad
ManufacturerTERUIPE #ad
Part NumberWP2172937



Ice Maker Water Line Kit, Food Grade Refrigerator/Fridge Water Tubing Installation Kit,1/4 In O.D. 25 FT Water Line with Quick Fittings,For Adding a branch waterway on RO Systems1/4"or 3/8" Outlet

PURENAT #ad - Also a clear installation instructions help you complete your work in minutes. Widely compatibility:our water line kit is suitable for connecting most standard under sink filtration system or reverse osmosis systems 1/4"or 3/8" Outlet to refrigerator, ice maker, water dispenser and more.

Prime quality accessories:The accessories in our kit are extremely safe and durable, there is no need to consider replacement for several years. Include all parts you need:25 ft 1/4" od tubing, and a compression fitting set 2 insert, 2 sleeve, a 1/4" shut off valve, a 1/4" x 1/4" x 1/4" tee(for 1/4" outlet water filters), 1/4" straight fitting, a 1/4" adapter, a 3/8" x 1/4" x 3/8" tee for 3/8" outlet water filters, 1 nut.

Safe material:our ice maker water line kit is made by food grade materials, have tested to meet NSF/ANSI standards and BPA free. Ensure you and your family enjoy crystal ice cubes and delicious pure water. Easy installation:the fittings in the water line kit are standard and Push-in quick connect, no additional tools required.
BrandPURENAT #ad
ManufacturerPURENAT #ad



PRYSM Range Igniter Replaces WB13K21

PRYSM #ad - Installation instructions available on our website - oven igniter assembly - Short ceramic style igniter with mounting bracket and wire nuts for installation - Amperage range is 3.

3 to 3. 6 *connector may need to be cut off and wires spliced to range wiring with porcelain wire nuts. This range igniter directly replaces the following part #'s: erwb13k21, wb13k0012, ea231280, 1085573, wb13k14, 2494, wb13k0014, ah231280, ps952863, wb13k10026, wb13k13, ap3202322, wb13k0013, ap2020569, wb13k12, wb13k0021, wb13t10045, wb13k10009, ea952863, ah952863, PS231280. Buy with confidence - snap Supply Parts always come with a 1 Year Warranty. Compatible with all major brands. Quality you can trust - all Snap Products are made with premium materials and are tested so they last.
BrandPRYSM #ad
ManufacturerPRYSM #ad
Height2 Inches
Length10.5 Inches
Width3.25 Inches
Part NumberWB13K21