#ad
#ad
Great Lakes Tool MFG INC 3920 #ad - Features a cast iron base, dust port, flex light, foot lock clamp, onboard storage, air pump, and three blades. Cuts wood up to 2 inches thick with a 16-inch throat depth in the standard position. On top of that, our removable pinless blade holder design tightly grips blades to prevent them from coming loose during operation.

Adjust the speed anywhere from 550 to 1600 strokes per minute with the simple turn of a knob. Spacious 16-by-11-inch table bevels up to 45 degrees to the left for angled cuts. Do not use power tools in the presence of flammable liquids or gases Unique design accepts blades in two directions standard and 90 degrees to allow for infinite ripping capacity.

This combined with the 1-1/2-inch dust port keep your work area clean so you can focus on your woodworking. The adjustable air pump clears saw dust from your work area to give you a clear line of vision as you cut. This unique blade holder accepts both pinned and pinless blades while also allowing users to change the direction of their cut to accommodate their particular workpiece.

WEN 3920 16-Inch Two-Direction Variable Speed Scroll Saw with Flexible LED Light #ad - The saw also includes a hold-down foot clamp for securing your project in place along with a flexible work light that bends and adjusts to whatever position your heart desires. For pinned blades, simply pop the pins out of the front holder and turn the blade 90 degrees. Variable speed goes from 400 to 1600 strokes per minute ; Motor : 120Volts, 60 Hz, 1.

More information about Great Lakes Tool MFG INC 3920 #ad

Olson Saw FR49501 Pin End Scroll Saw Blade

#ad
#ad
Blackstone Industries, LLC FR49501 #ad - The product is Easy installation and easy handling. Contains 6 each of fr42401, sc41101 and SC41201. The product is manufactured in USA. Cuts in hard/soft wood and plastic. The product is manufactured in China. For machines that require 5" pinned blades. The product is easy to use and highly durable. 18 pack, 41101 & 41201, 5", assorted, 42401, pin end scroll saw blade, 6 Blades Each Of #'s 42401, 18.

5 tpi,. 080" wide,. 010" thick, plastic, for very thin cuts in material 3/32" to 1/2" thick, For Cutting Hard/Soft Wood, 15 TPI, #41101, .100" wide,. 018" thick, felt, for cutting Wood, Bone, Plastic, Wallboard, Etc.10 tpi, #41201, .100" wide,. 018" thick, for cutting Hard/soft Wood & Plastic Etc. The product is easy to use and highly durable.

More information about Blackstone Industries, LLC FR49501 #ad


Similar products



Scroll Saw Blades for Thick Wood, 12-Pack

#ad
#ad
Olson #ad - Hardened and tempered teeth for extra blade life. For machines that require 5" pinned blades. The product is easy to use and highly durable. Cuts in hard/soft wood and plastic. Clean top/bottom, smooth finish. The product is manufactured in USA. The product is Easy installation and easy handling. Special scroll saw blade with 7 teeth per inch and extra wide gullet for rapid cutting of solid hard/soft wood and multi layers from 3/4" up to 2" thick.

Contains 6 each of fr42401, sc41101 and SC41201. These blades are flat ended - NO PINS. Thickness. 018". Width. 08". For cutting hard/soft wood and multilayers from 3/4" to 2" thick. 7 teeth per inch.

More information about Olson #ad


Similar products



Olson Saw PG49802 Precision Ground Scroll Saw Blade

#ad
#ad
Blackstone Industries, LLC PG49802 #ad - Longest lasting 3 to 4 times the cutting life. Double tooth for top performance in hardwoods. Contains 6 each of fr42401, sc41101 and SC41201. These blades are flat ended - NO PINS. Most accurate scroll saw blade ever made. Width. 08". Cuts in hard/soft wood and plastic. For cutting hard/soft wood and multilayers from 3/4" to 2" thick.

7 teeth per inch. Used and endorsed by scroll experts. Sharpest, fastest cutting teeth. Thickness. 018". The product is Easy installation and easy handling. The product is manufactured in USA. Most accurate scroll saw blade ever made. The product is easy to use and highly durable. Sharpest, fastest cutting teeth. Reverse teeth for clean, sharp edges on top and bottom surfaces and sand free finish.

Olson Saw PG49802 Precision Ground Scroll Saw Blade #ad - For machines that require 5" pinned blades. Double tooth for top performance in hardwoods.

More information about Blackstone Industries, LLC PG49802 #ad


Similar products



WEN 4208 8 in. 5-Speed Drill Press

#ad
#ad
WEN 4208 #ad - These blades are flat ended - NO PINS. The perfect size for the shop and portable enough to take to the job. The product is manufactured in USA. Motor: 120v, 60hz. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. For cutting hard/soft wood and multilayers from 3/4" to 2" thick.

7 teeth per inch. Most accurate scroll saw blade ever made. The product is Easy installation and easy handling. Width. 08". For machines that require 5" pinned blades. The ½” chuck with jt33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45° left and right for those tricky operations for the perfect right angles consistently.

WEN 4208 8 in. 5-Speed Drill Press #ad - When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. Includes a 1/2-inch keyed chuck and onboard key storage. Double tooth for top performance in hardwoods. Max drill capacity is 1/2” in 1” thick cast iron. Cuts in hard/soft wood and plastic.

More information about WEN 4208 #ad


Similar products



Scroll Saw Workbook, 3rd Edition: Learn to Master Your Scroll Saw in 25 Skill-Building Chapters Fox Chapel Publishing Ultimate Beginner's Guide with Projects to Hone Your Scrolling Skills

#ad
#ad
Fox Chapel Publishing #ad - Thickness. 018". Width. 08". These blades are flat ended - NO PINS. Now it's your turn!this book is like having an experienced scroller in your shop, looking over your shoulder to tell you step-by-step how to get great results from your scroll saw. You'll find everything you need to know here, boiled down to the best and simplest methods.

For cutting hard/soft wood and multilayers from 3/4" to 2" thick. 7 teeth per inch. Includes a 1/2-inch keyed chuck and onboard key storage. The product is manufactured in USA. Contains 6 each of fr42401, sc41101 and SC41201. 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right.

Scroll Saw Workbook, 3rd Edition: Learn to Master Your Scroll Saw in 25 Skill-Building Chapters Fox Chapel Publishing Ultimate Beginner's Guide with Projects to Hone Your Scrolling Skills #ad - The product is easy to use and highly durable. Cuts in hard/soft wood and plastic. As you progress, each chapter builds upon the previous skills you've already learned. Double tooth for top performance in hardwoods. Motor: 120v, 60hz. By the time you've completed the book, you'll be ready to tackle any scroll saw project with experience and confidence.

Begin with the basics of cutting straight, compound, segmentation, inlay, and jagged lines, relief, and then progress to more advanced techniques like stack cutting, curved, and more.

More information about Fox Chapel Publishing #ad


Similar products



WEN 6500 4 x 36-Inch Belt and 6-Inch Disc Sander with Steel Base

#ad
#ad
WEN 6500 #ad - The product is manufactured in USA. And because this is a wen product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a helpful customer phone line all to make sure that you remember WEN. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires.

Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc. Sharpest, fastest cutting teeth. These blades are flat ended - NO PINS. The product is easy to use and highly durable. For machines that require 5" pinned blades. The belt also tilts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece.

WEN 6500 4 x 36-Inch Belt and 6-Inch Disc Sander with Steel Base #ad - Double tooth for top performance in hardwoods. Features an open-style steel frame design. Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM. Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations. Swing: 8 inch. The product is Easy installation and easy handling.

More information about WEN 6500 #ad


Similar products



Olson Saw SP46500 Spiral Scroll Saw Blade

#ad
#ad
Blackstone Industries, LLC SP46500 #ad - Features an open-style steel frame design. The product is easy to use and highly durable. 3. 2a motor provides up to 1150 FPM. Excellent for 0 radius scroll/fret work - you never have to turn the work piece. Belt tilts anywhere from 0 to 90 degrees. Tension release Lever makes for Simple changes to sandpaper grit.

Contains 6 each of fr42401, sc41101 and SC41201. These blades saw in all directions and have 360 cutting capability. Use for cutting all types of materials including wood, wax, plaster, horn, plastic, bone, non-ferrous metals, etc. Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc.

Olson Saw SP46500 Spiral Scroll Saw Blade #ad - Most accurate scroll saw blade ever made. Cutting speed and finish depend on material thickness and number of teeth per inch. The product is Easy installation and easy handling. Durable 1/3 hp induction motor develops ample torque and power. These premium blades are made of high carbon steel, hardened and tempered to stay sharp longer.

For cutting hard/soft wood and multilayers from 3/4" to 2" thick. 7 teeth per inch.

More information about Blackstone Industries, LLC SP46500 #ad


Similar products



Flying Dutchman New Spiral Five Dozen Scroll Saw Blade Variety Pack

#ad
#ad
Flying Dutchman #ad - Cuts in hard/soft wood and plastic. Motor: 120v, 60hz. Flying dutchman scroll saw blades are 5" long and are pinless. Thickness. 018". Belt tilts anywhere from 0 to 90 degrees. With teeth down both sides of the blade and then twisted, it gives a smoother cut than regular spiral blades. Durable 1/3 hp induction motor develops ample torque and power.

3. 2a motor provides up to 1150 FPM. Contains 6 each of fr42401, sc41101 and SC41201. These blades are flat ended - NO PINS. Horsepower: 1/3 HP. Fox chapel Publishing. 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right. Cutting speed and finish depend on material thickness and number of teeth per inch.

Flying Dutchman New Spiral Five Dozen Scroll Saw Blade Variety Pack #ad - The flying dutchman new spiral five dozen scroll saw blade Variety Pack includes one dozen of each of the following blade sizes: #3/0, #1, #2/0, #3, and #5. Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc. The product is manufactured in USA. The product is Easy installation and easy handling.

The product is easy to use and highly durable.

More information about Flying Dutchman #ad


Similar products



Olson Saw FR49501 Pin End Scroll Saw Blade 36 Pack

#ad
#ad
UnAssigned #ad - Tension release Lever makes for Simple changes to sandpaper grit. The product is manufactured in USA. Operates at 5 different speeds: 740, 2100, 1100, 1530, 3140 RPM. Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations. For cutting hard/soft wood and multilayers from 3/4" to 2" thick.

7 teeth per inch. Contains 6 each of fr42401, sc41101 and SC41201. Horsepower: 1/3 HP. Fox chapel Publishing. These blades are flat ended - NO PINS. Perfect for sears craftsman, delta, Ryobi, Penn State, all 15" and 16" imported scroll saws. Double tooth for top performance in hardwoods. Width. 08". Cuts in hard/soft wood and plastic.

Olson Saw FR49501 Pin End Scroll Saw Blade 36 Pack #ad - The product is easy to use and highly durable. For machines that require 5" pinned blades. For machines that require 5" pinned blades. Includes a 1/2-inch keyed chuck and onboard key storage.

More information about UnAssigned #ad


Similar products



WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base

#ad
#ad
WEN 6502T #ad - Includes a 1/2-inch keyed chuck and onboard key storage. Horsepower: 1/3 HP. Fox chapel Publishing. Double tooth for top performance in hardwoods. For machines that require 5" pinned blades. Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, a stop bar for safety and control, and a 2.

25 inch dust port to connect a dust extractor. With teeth down both sides of the blade and then twisted, it gives a smoother cut than regular spiral blades. The flying dutchman new spiral five dozen scroll saw blade Variety Pack includes one dozen of each of the following blade sizes: #3/0, #3, #2/0, #1, and #5.

WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base #ad - The product is Easy installation and easy handling. Swing: 8 inch. With all of this in addition to the 6-inch side disc, you’ll have the capacity to sand whatever your heart desires. Width. 08". Most accurate scroll saw blade ever made. Motor: 120v, 60hz. The product is Easy installation and easy handling.

More information about WEN 6502T #ad


Similar products